The most efficient and durable device: a stainless steel submersible pump for dirty water, the Drain 20000 HD. Pumps for dirty water are used when there is a need to get rid of contaminated liquids - for example, after severe floods, from contaminated ponds or tanks, and during the dewatering of construction trenches. Then, in addition to water, the device must also pump contaminants, which significantly increases the load on the material and the motor.
A strong pump for pumping dirty water, for special tasks. It is good if it is an AL-KO pump. Thanks to the special impeller geometry, the Drain 20000 HD model can pump even heavily soiled water with a suspended particle content of up to 5% and impurities up to 38 mm in diameter. The durable and stable construction with quadruple sealing, the maintenance-free motor, and the specially prepared acid-resistant steel motor shaft guarantee a long service life for AL-KO dirty water submersible pumps. Moreover, the acid-resistant steel housing protects the pump against corrosion.
Thanks to the convenient integrated carrying handle, a 10 m cable, and a low weight of just 8 kg, the pump can be used both mobile and stationary - of course, also for clean water. With compact dimensions of 23.20 x 23.20 x 37.40 cm, a robust housing, and a long-life motor, it is also ideally suited as a pump for a pond, construction trench, or drainage tank. It offers a durable and stable construction and multi-stage sealing. Due to the large inlet openings, the AL-KO Drain 20000 HD model handles large impurities just as well. Both clean liquids and liquids contaminated with particles up to 38 mm in diameter are pumped out efficiently and quickly. The specially prepared motor shaft and housing made of acid-resistant steel ensure a long service life for the device. With a power of 1300 W and a capacity of up to 20000 l/h, pumping out and transferring takes place in a flash. The AL-KO Drain 20000 HD submersible pump is equipped with a float switch and automatically starts the pumping process when the appropriate water level is reached. The maximum submersion depth of the pump is 7 m. With a delivery head of up to 10 m, it can overcome even greater depths. The pump outlet has a size of 2 inches, which is approximately 59.6 mm. The 90° elbow connector has a universal fitting, and thanks to the included adapter, all available hose sizes can be connected. Note: This garden pump is not suitable for drinking water, but only for service water with a temperature below 35° C. It is also not suitable for use in salt water or water containing aggressive chemicals.
