Al Ko - 113036 - Submersible Pump DIVE 5500/3

This submersible pump combines the advantages of a submersible pump and a garden pump – high output and consistently high pressure. Draining tanks, extracting water from wells/well pits/other tanks, supplying lawn sprinklers and more complex irrigation systems in combination with a hydro controller – AL-KO submersible pumps combine the advantages of submersible pumps and garden pumps in one device. With the AL-KO Dive 5500/3 submersible pump, you can finally water your plants directly from a well or cistern. A particular advantage of this pump is its high output at consistently high pressure. The 3-stage drive provides high performance of up to 5500 l/h and a 30-meter head. With this high power, you can supply several irrigation systems simultaneously. The pump outlet has a size of 1 inch (33.3 mm). 3-stage pump drive: high flow rate up to 5500 l/h, max. head 30 m. Long service life thanks to the stainless steel motor shaft. Quadruple sealing system. Submersible and garden pump in one device. Maintenance-free motor with thermal switch. The Dive 5500/3 submersible pump, thanks to its practical carrying handle, 10-meter power cable and low weight of only 9.5 kg, can be used both as a mobile and stationary device for draining or irrigation. Corrosion-resistant materials (stainless steel) and maintenance-free components ensure many years of pump operation. The unique quadruple sealing system, consisting of a ceramic axial seal in the high-pressure area and a triple seal on the motor shaft, effectively protects the drive and electronics from water penetration. This is important because the AL-KO Dive 5500/3 submersible pump is not connected above ground like a regular garden pump, but operates directly in the water. The inlet of the AL-KO Dive 5500/3 submersible pump is equipped with a stainless steel strainer to protect the interior from contamination. Furthermore, the motor shaft is made of high-quality stainless steel, which ensures a particularly long service life. Thanks to the efficient 800 W motor and 3-stage drive, the pump achieves a flow rate of up to 5500 l/h, meaning pumping is done in no time. Its maximum immersion depth is 7 m, and the maximum head is 30 m. The maximum permissible particle size is 0.5 mm. The pump outlet has a size of 1 inch (33.3 mm). Note: The submersible pump is not suitable for drinking water, but only for service water and chlorinated water (pool water) at temperatures below 35° C. It is also not suitable for use in salt water, with aggressive chemicals, or water containing sand.