Al Ko - 113594 - Submersible Pump TS 400 ECO

Pumps for dirty water are used when it is necessary to remove heavily contaminated liquids, e.g. after severe flooding, in polluted ponds, cisterns, or when dewatering construction trenches. These pumps, in addition to water, must also carry dirt particles. This significantly increases the load on the motor and the motor's performance. It is good if it is an AL-KO pump, because it will handle it without any problem. Thanks to the practical retractable handle and a power cable 10 m long, as well as a low weight of only 3.8 kg, the dirty water pump can be used mobile or stationary for emptying dirty water, but of course also for clean water. The AL-KO TS 400 ECO submersible pump also handles large impurities in the water well, because there are special very large suction openings for this purpose. Both clean and dirty liquids with a grain size of up to 30 mm are pumped out quickly and safely. Thanks to the high power of 400 W and a flow rate of up to 8000 l/h, pumping out takes place in a very short time. The AL-KO TS 400 ECO submersible pump is equipped with a float switch and, thanks to automatic level control, automatically starts the pumping process. Due to the maximum delivery head (6 m), water can be pumped over long distances. The pump outlet is 1 1/4". The 90° elbow has a universal connector, and all standard hose sizes can be connected using the included fitting.