Case IH 18331 (4166.02, 4166.03, 4166.04, 518662.07) - ACML – ACML: MFH Rear Hitch Fast Raise Switch Error State
Issue description
The system has detected an electrical anomaly in the MFH (Multi Function Handle) Rear Hitch Fast Raise Switch (S116) circuit, indicating the controller is seeing a voltage that is too high, too low, or an open/short circuit preventing proper operation.
Applies to these machines
6 machines- MAXXUM T4E
- VESTRUM CVX
- Puma Series (125, 165, 180, 195, 210, 225, 240 CVX)
- Magnum Series (235, 260, 290, 340)
- Maxxum Series
- Steiger Series
Check the cause
Identify the Rear Hitch Fast Raise Switch (S116) circuit
Inspect connector X846 (connecting the MFH to the Armrest Control Unit) for loose pins, pushed-out terminals, moisture, or corrosion
Inspect the wiring harness (electrical schematic frame 25 / 55.100) between the MFH and the Armrest Control Unit for chafing or pinches
Test the S116 circuit for a short to ground, short to power, or an open circuit
Repair steps
Safety First
Park the tractor on a flat surface, turn off the engine, and ensure all hydraulic pressure is relieved from the circuits before beginning work.
Access the Armrest
Disassemble the armrest console to access the bottom of the Multi Function Handle and the Armrest Control Unit (GARU).
Disconnect Electrical Connections
Carefully disconnect connector X846 and any associated harness plugs (such as X847 or X776) leading to the joystick.
Remove the MFH
If the S116 switch itself has failed internally, the entire Multi Function Handle (Joystick) assembly generally must be replaced, as the switches are integrated into the handle. Unbolt the handle assembly from the armrest mount.
Install the New Handle
Mount the replacement MFH and route the wiring harness carefully to avoid pinch points.
Reconnect and Reassemble
Reconnect X846 and reassemble the armrest console.
Clear Codes and Calibrate
Turn the key on, clear the inactive 18331 fault code from the ACML, and test the rear hitch fast raise function to ensure the error does not return.
Parts you might need
(7)MFH Lever
84567685CFor CVT transmissions
MFH Lever
84567685RFor CVT transmissions
Remanufactured / Core Joystick
84209526RFor Powershift transmissions
Remanufactured / Core Joystick
84209526CFor Powershift transmissions
MFH Lever
84567332Superseded by newer numbers in some catalogs
Multi-Function Handle
47844023Supersedes older variants for certain Tier 4A models
Remanufactured MFH Lever
47829594R
Get help to fix this fault by requesting a quote