Case IH A-GNSS-106 - Display – Display / GNSS Receiver: No RTK subscription

The RTK (Real-Time Kinematic) correction subscription has expired. The system cannot utilize high-accuracy RTK guidance until the subscription is renewed.

• MAGNUM AFS Connect
• STEIGER AFS Connect
• Case IH Magnum AFS Connect series (e.g., Magnum 400)
• Steiger AFS Connect series
• Any Case IH machine equipped with the AFS Pro 1200 display and RTK-capable receivers (Vector Pro, AFS 372, AFS 392)

1. 1

   Navigate to the 'GNSS Setup' screen on your AFS Pro 1200 display.

2. 2

   Verify the current RTK subscription status and expiration date.

3. 3

   Confirm whether the machine actually requires RTK-level accuracy for the current field task, or if a lower-tier correction signal (like WAAS or RangePoint RTX) will suffice.

1. 1

   Renew Subscription

   Contact your RTK subscription provider or local Case IH dealer to purchase a subscription renewal.

2. 2

   Initialize Receiver

   Once the subscription is renewed and pushed to the machine via AFS Connect (or entered manually if required), allow the GNSS receiver to initialize in an area with a clear view of the sky.

3. 3

   Verify Fault Cleared

   The fault code will clear once the receiver authenticates the active subscription.

4. 4

   Open GNSS Setup (Option 2: Disable RTK)

   Open the 'GNSS Setup' screen on the display.

5. 5

   Locate RTK Settings

   Locate the RTK correction settings.

6. 6

   Disable RTK

   Disable the RTK correction.

7. 7

   Switch Correction Source

   Switch your correction source to an available, non-expired tier (e.g., WAAS or an autonomous signal). The fault code will clear, though pass-to-pass accuracy will be reduced.