Case IH A-PF-175 - Display – Precision Farming (PF) controller / Data Management system: Export Failed

A "Low" severity code indicating that a data export process (such as exporting yield data, boundaries, or prescriptions to a USB drive) was incomplete.

• MAGNUM AFS Connect
• STEIGER AFS Connect
• AFS Connect Magnum series tractors
• AFS Connect Steiger series tractors
• Optum series tractors
• Long-wheelbase Puma series tractors
• Axial-Flow 260 and AF series combines
• Patriot 50 series sprayers

1. 1

   Check the USB drive to ensure it is properly inserted into the display's USB port.

2. 2

   Verify that the USB drive has sufficient free storage space to accept the exported data.

3. 3

   Check the file structure to ensure the USB drive is formatted correctly and does not have corrupted .cn1 or TASKDATA folders.

4. 4

   Attempt the data export again to rule out a temporary software glitch.

1. 1

   Re-attempt Export

   Re-insert the USB drive and try the export process again.

2. 2

   Test the USB Drive

   If the export fails, remove the USB drive and test it on a computer to ensure it is readable and not corrupted.

3. 3

   Replace the USB Drive

   Try using a brand new, properly formatted USB flash drive and attempt the export once more.

4. 4

   Reboot the Display

   Perform a key-off cycle to reboot the AFS Pro 1200 display and clear any temporary memory hangups.

5. 5

   Dealer Intervention

   If the display consistently fails to export data to known-good USB drives, determine the cause of the incomplete data export. See your CASE IH dealer if you need assistance. The display may require a firmware update (Over-the-Air or via dealer laptop) or hardware replacement.