Case IH NH2075: Damper Angle Out of Range

The damper angle is not within the acceptable range, as it is either below 50 degrees or above 85 degrees. This condition may affect the proper operation of the system.

1. 1

   Damper position

2. 2

   Damper mechanism

3. 3

   Sensor reading for damper angle

1. 1

   Inspect

   Check the physical position of the damper to ensure it is not mechanically restricted or obstructed.

2. 2

   Verify

   Confirm the accuracy of the damper angle sensor reading using the diagnostic tool.

3. 3

   Adjust

   If the damper is out of range, adjust the mechanism to bring the angle within the acceptable range.