Case IH NH2085: Synchro 4 Solenoid Open Circuit

The system has detected an open circuit in the Synchro 4 solenoid. This condition may prevent the solenoid from functioning properly, affecting the operation of the associated mechanism.

1. 1

   Wiring connections to the Synchro 4 solenoid

2. 2

   Continuity of the wiring between the solenoid and the controller

3. 3

   Physical integrity of the Synchro 4 solenoid

1. 1

   Inspect

   Check the wiring connections to the Synchro 4 solenoid for looseness, corrosion, or damage.

2. 2

   Test

   Use a multimeter to test for continuity in the wiring between the Synchro 4 solenoid and the controller.

3. 3

   Replace

   If the wiring is damaged or the solenoid is faulty, replace the Synchro 4 solenoid as needed.