Case IH U13 – Transmission Control Module / EDC: Front suspension option not activated

This is a configuration or software setting error indicating the tractor's computer system is not currently programmed to recognize or operate the front axle suspension system.

• Puma/Mid Range Magnum
• Case IH Puma Series (Puma 140, Puma 210)
• Case IH MX170

1. 1

   Confirm that the tractor is physically equipped with the front suspension option

2. 2

   Verify the current configuration in the tractor's H3 transmission sub-system menu to see if the suspension setting has been accidentally disabled or lost during a calibration procedure

1. 1

   Access the H3 Menu Screen

   Access the H3 Menu Screen on the tractor's display.

2. 2

   Select the transmission sub-system

   Select the transmission sub-system by depressing the 'dimming' key.

3. 3

   Check lower central display

   The lower central display will show 'ch _'.

4. 4

   Navigate to the correct channel

   Use the 'h' and 'm' keys to navigate to the correct channel for the front suspension.

5. 5

   Enable the front suspension option

   Turn on / enable the front suspension option.

6. 6

   Save and exit

   Save the selection and exit the menu.