Challenger E9090 – ECU: Error Signal in Engine Speed Evaluation
Issue description
The engine control module has detected a problem with the signals it uses to determine the rotational speed of the engine. This indicates a missing, intermittent, or implausible signal from one or more relevant sensors, such as the crankshaft or camshaft position sensors, preventing the system from accurately evaluating engine speed.
Applies to these machines
2 machines- MT700
- MT800
Check the cause
Inspect the wiring harnesses and connectors associated with the engine speed sensors for signs of damage, chafing, corrosion, or loose connections
Check for other active or stored fault codes related to specific sensors (e.g., crankshaft or camshaft speed sensors) to help pinpoint the source
Inspect the primary engine speed sensors (crankshaft and camshaft position sensors) for physical damage or excessive metal debris on the sensor tips
Perform a visual inspection of the CAN bus wiring and connectors for damage, as CAN bus integrity issues can manifest as signal errors
Repair steps
Confirm the fault
Verify that the E9090 fault code is active or stored in the ECU.
Perform Basic Checks
Carry out the diagnostic checks listed above.
Isolate the faulty component
If basic visual checks do not reveal the issue, test the sensors and the wiring between the sensor and the ECU using a multimeter or oscilloscope to verify signal output and continuity.
Replace faulty component
If a specific sensor (crankshaft, camshaft, or engine speed sensor) or wiring section is identified as faulty during testing, replace it.
Clear fault codes and test
After any repair or replacement, clear the fault codes from the ECU and operate the tractor to ensure the issue is resolved.
Parts you might need
(4)- Crankshaft Speed/Position SensorV837069150
Generic AGCO part example. Exact part number varies by engine and tractor model; verify with dealer.
Camshaft Speed/Position Sensor
Exact part number varies by engine and tractor model; verify with dealer.
Engine Speed Sensor
F339202210180Generic AGCO part example. Exact part number varies by engine and tractor model; verify with dealer.
Wiring Harnesses and Connectors
Replace sections of the wiring harness or specific connectors if damage is found.
Get help to fix this fault by requesting a quote