T4144

Challenger T4144 – TCU: Fault in Engine Speed Sensors Affecting Korob Mode

Issue description

The transmission control unit (TCU) has detected a failure or irregularity in the signal from the engine speed sensors. This fault affects the transmission's protective mode (referred to as 'Korob Mode' or limp mode), which activates to prevent damage to the transmission when a fault is detected.

Applies to these machines

  • MT635B

Check the cause

  1. Check for any other active or stored fault codes via the tractor's diagnostic screen

  2. Inspect the wiring harness and connectors between the engine speed sensors and the transmission control unit for any signs of damage, corrosion, or loose connections

  3. Test the sensor's signal output

Repair steps

  1. Check diagnostic codes

    Check for any other active or stored fault codes via the tractor's diagnostic screen.

  2. Inspect wiring and connectors

    Inspect the wiring harness and connectors between the engine speed sensors and the transmission control unit for any signs of damage, corrosion, or loose connections.

  3. Test sensor output

    Test the sensor's signal output, which requires a service manual for the correct specifications.

  4. Contact authorized dealer

    Contact an authorized Challenger dealer for further diagnosis and assistance.

Parts you might need

(3)
  • Unconfirmed applicability; verify with dealer using tractor serial number

  • Engine Speed Sensor

    72624518

    Unconfirmed applicability; verify with dealer using tractor serial number

  • Transmitter Engine Speed Sensor

    F339202210180

    Unconfirmed applicability; verify with dealer using tractor serial number

Get help to fix this fault by requesting a quote

Browse other Challenger codes