T4156

Challenger T4156 – TCU: Transmission Filter Clogging Sensor Fault

Issue description

The fault code indicates an issue with the transmission filter clogging sensor, which monitors the condition of the transmission filter. This can be caused by a genuinely clogged filter restricting fluid flow, or a malfunction within the sensor itself or its wiring. If unaddressed, a restricted filter can lead to serious transmission issues by preventing proper lubrication and cooling of critical components.

Applies to these machines

  • MT400
  • MT500
  • MT700
  • MT900
  • MT900E

Check the cause

  1. Review maintenance records to determine if a transmission filter and fluid change is overdue

  2. Check transmission fluid for signs of contamination, such as a dark color or a burnt smell (healthy fluid is typically bright red and clear)

  3. Monitor shifting performance for delayed or erratic shifting, which indicates restricted fluid flow

  4. Listen for unusual noises like whining, grinding, or clunking during operation

  5. Inspect for fluid leaks from gaskets and seals caused by pressure buildup from a clogged filter

Repair steps

  1. Prepare machine for service

    Ensure the tractor is on a level surface, the parking brake is engaged, and the engine is off.

  2. Drain transmission fluid

    Place a suitable container under the transmission and drain the fluid.

  3. Replace transmission filter

    Locate and replace the transmission filter element. Note that some models may have more than one filter, such as an internal cartridge filter accessible after draining the fluid.

  4. Inspect and replace sensor

    If the filter is not significantly clogged, inspect the clogging sensor and its wiring for damage. Replace the sensor if necessary.

  5. Refill transmission fluid

    Refill the transmission with fresh, manufacturer-recommended fluid.

  6. Clear fault codes

    Use a diagnostic tool to clear the T4156 fault code.

  7. Test operation

    Start the tractor and allow it to reach operating temperature. Check for leaks and verify that the transmission is operating smoothly and the fault code does not reappear.

Parts you might need

(4)
  • Specific to MT900E series, verify fitment by model

  • Internal Transmission Filter Element

    PT9462

    Baldwin aftermarket part number for some AGCO/Challenger tractors

  • Spin-on Hydraulic Oil Filter

    AG610114

    AGCO Parts filter listed for transmission use

  • Transmission Filter Clogging Sensor

    Source through an authorized Challenger dealer's parts department

Get help to fix this fault by requesting a quote

Browse other Challenger codes