T4173

Challenger T4173 – TCU: Transmission Oil Temperature Sensor Fault

Issue description

The system has detected a fault related to the transmission oil temperature sensor data. This indicates a problem with the signal from the sensor, which may stem from a failure of the sensor itself, damaged wiring, or poor connections between the sensor and the Transmission Control Unit (TCU).

Check the cause

  1. Visually inspect the transmission oil temperature sensor and its wiring for any visible signs of damage, such as frayed wires or loose connections

  2. Ensure the harness connectors for the sensor are clean and securely connected, as poor connections are a common cause of electrical circuit problems

  3. Inspect the wiring harness leading from the sensor to the transmission control unit for any open circuits, shorts, or high resistance

  4. Perform a resistance test on the sensor: allow the transmission to cool to ambient air temperature, disconnect the sensor, measure the resistance between its pins, and compare the reading to a standard resistance chart

Repair steps

  1. Park machine

    Lower implements and park the machine on level ground.

  2. Stop engine

    Stop the engine and remove the key.

  3. Disconnect sensor

    Locate and disconnect the faulty transmission oil temperature sensor.

  4. Replace sensor

    Remove the old sensor and install the new one.

  5. Reconnect wiring

    Reconnect the wiring harness.

  6. Clear code and test

    Clear the fault code and test the machine to ensure the fault does not return.

Parts you might need

(6)
  • Transmission Oil Temperature Sensor

    3795429M1

    Sender, Transmission. Verify correct part number for your specific machine model and serial number.

  • Transmission Oil Temperature Sensor

    V837086231

    Verify correct part number for your specific machine model and serial number.

  • Verify correct part number for your specific machine model and serial number.

  • Transmission Oil Temperature Sensor

    ACW2167060

    Verify correct part number for your specific machine model and serial number.

  • Transmission Oil Temperature Sensor

    4255572M91

    Verify correct part number for your specific machine model and serial number.

  • Transmission Oil Temperature Sensor

    3761983M91

    Sensor, Transmission. Verify correct part number for your specific machine model and serial number.

Get help to fix this fault by requesting a quote

Browse other Challenger codes