CLAAS 7515h: Voltage of the signal specified by the stop lifting too low command is incorrect

The voltage of the signal associated with the stop lifting too low command is not within the expected range. This causes the lifting function to be locked. External controls should be used to address the issue.

1. 1

   The signal voltage associated with the stop lifting too low command

2. 2

   The connection and integrity of the circuit related to the stop lifting too low command

3. 3

   The external controls used for lifting operations

1. 1

   Check the voltage of the signal specified by the stop lifting too low command

   Use a multimeter to measure the voltage of the signal. Compare it to the specifications provided in the service manual.

2. 2

   Inspect the circuit related to the stop lifting too low command

   Check for any loose connections, damaged wiring, or other issues that may affect the signal.

3. 3

   Use external controls to manage the lifting function

   If the signal voltage is not correct, use external controls to operate the lifting function until the issue is resolved.