CLAAS 75DCh – Claas Tr1 A57 1 Transmission Module: Issue with Saving Parameters During Standby Mode

The system is experiencing a problem with saving parameters when placing units on standby. The cause may be related to a loss of the permanent 12 V supply before the 12 V shutoff after switching on the ignition. The system may require adjustment of the 'Auto 5' setting.

1. 1

   The permanent 12 V supply before ignition is turned on

2. 2

   The 'Auto 5' setting in the system configuration

1. 1

   Verify the 12 V supply

   Check for a loss of the permanent 12 V supply prior to 12 V shutoff after switching on the ignition.

2. 2

   Adjust the 'Auto 5' setting

   If the 12 V supply is stable, modify the 'Auto 5' setting as required.