CLAAS 77B0h – Claas Hyd A60 Claas Hydraulic Module: Power Supply of Valve 1 Too High (> 42 V) - Electrodistributor 1 Returns to Neutral

The power supply of valve 1 is exceeding 42 V, which is above the acceptable range. This is caused by electrodistributor 1 returning to neutral. The issue is related to the electrodistributor module (A105-1).

1. 1

   Electrodistributor 1 for proper operation and return to neutral

2. 2

   Power supply to valve 1 for voltage levels exceeding 42 V

3. 3

   Electrodistributor module (A105-1) for faults or malfunctions

1. 1

   Inspect electrodistributor 1

   Check if electrodistributor 1 is returning to neutral as described. Ensure it is functioning correctly.

2. 2

   Verify power supply to valve 1

   Measure the voltage supplied to valve 1 to confirm it exceeds 42 V.

3. 3

   Test electrodistributor module (A105-1)

   Check the electrodistributor module (A105-1) for faults or malfunctions that may be causing the issue.