CLAAS A036h: Valve 2 returns to neutral - Error when saving parameters in the EEPROM

The system reports an error when saving parameters in the EEPROM, indicating a memory problem. Valve 2 is returning to neutral, which may be related to the memory issue. The system suggests switching the ignition off and waiting at least 20 seconds. If the error persists, the valve 2 should be replaced.

1. 1

   The status of the EEPROM and its ability to retain parameters

2. 2

   The operation of Valve 2 and its return to neutral position

3. 3

   The ignition system and its effect on the controller's operation

1. 1

   Switch the ignition off

   Turn off the ignition and wait for at least 20 seconds.

2. 2

   Restart the system

   After waiting, restart the system and check if the error reappears.

3. 3

   Replace Valve 2

   If the error appears again, replace Valve 2 as indicated by the system.