CLAAS A102h: Fault in Valve 7 During RAM Test

An error occurred during the RAM test at start, indicating a faulty RAM. Valve 7 is returning to neutral. The error can be cleared, but if it reappears, the 7 valve may need to be replaced.

1. 1

   Check if the error clears after resetting the system

2. 2

   Verify if the error reoccurs after restarting the machine

3. 3

   Inspect the 7 valve for signs of malfunction or improper operation

1. 1

   Clear the error

   Follow the procedure to clear the fault code as specified in the service manual.

2. 2

   Restart the machine

   Restart the machine and observe if the error reappears.

3. 3

   Replace the 7 valve

   If the error reappears after clearing, replace the 7 valve as indicated in the source.