CLAAS A12Dh: Fault in RAM Test - Valve 8 Returns to Neutral

The system detected an error during the RAM test at start, indicating a fault in the RAM. The 8 valve returns to neutral, and the RAM memory of the 1 valve is write/read tested during startup. If the error reoccurs, the 8 valve may need to be replaced.

1. 1

   Check if the error reappears after clearing it

2. 2

   Verify the condition of the 8 valve

3. 3

   Ensure the system is properly powered and the RAM test is executed correctly

1. 1

   Clear the error

   Follow the procedure to clear the fault code from the system.

2. 2

   Monitor the system

   Restart the system and observe if the error reappears.

3. 3

   Replace the 8 valve

   If the error appears again, replace the 8 valve as indicated in the source.