CLAAS A130h: Fault Code A130h - Valve 8 Returns to Neutral

The system has detected an internal calculation error, specifically a value that is out of range. As a result, Valve 8 returns to neutral. The error can be cleared, but if it reoccurs, the Valve 8 may need to be replaced.

1. 1

   Check if the error clears after the system is reset.

2. 2

   Monitor the operation of the system to determine if the error reappears.

3. 3

   Verify the condition of Valve 8 during system operation.

1. 1

   Clear the error

   Use the diagnostic tool to clear the fault code A130h.

2. 2

   Monitor the system

   Observe the system operation to determine if the error reappears after clearing.

3. 3

   Replace Valve 8

   If the error reappears, replace Valve 8 as indicated in the source.