LC1

Deutz-Fahr LC1 – ECU: Eng Speed Fault

Issue description

An 'Eng Speed Fault' indicates a problem with the signal used by the Engine Control Unit (ECU) to monitor the speed and position of the crankshaft and/or camshaft. The signal may be missing, intermittent, or implausible (such as the crankshaft and camshaft signals not matching the expected timing relationship). This prevents the ECU from properly controlling fuel injection timing and ignition, which can prevent the engine from starting or cause it to enter a reduced power mode.

Applies to these machines

  • 1011
  • 2011
  • TCD series
  • TCD 3.6 L4
  • TCD 7.8 L6
  • TD 2.9 L4
  • TCD2015V06
  • FL413

Check the cause

  1. Inspect the wiring harnesses and connectors for the crankshaft and camshaft speed sensors for chafing, breaks, corrosion, or loose connections

  2. Verify that the speed sensors are securely mounted and check the air gap between the sensor and the sensor wheel

  3. Examine the sensor wheel (tone ring or reluctor wheel) for bent, broken, or missing teeth, and confirm it has not shifted out of position

  4. Verify sensor polarity to ensure the wiring is not swapped, which can lead to an implausible signal

Repair steps

  1. Repair wiring

    If damaged wiring is found, repair or replace the affected section of the harness. Clean any corroded connectors and ensure all connections are secure.

  2. Adjust or replace sensor

    Adjust the sensor air gap to manufacturer specifications if it is incorrect. If the sensor fails resistance or voltage tests, replace it with the correct part for your engine model.

  3. Correct sensor wheel issues

    If the sensor wheel is damaged or misaligned, it must be repaired or replaced. Note that this can be a significant mechanical job, potentially requiring removal of the flywheel housing or other major components.

  4. Clear fault codes

    After performing repairs, use a diagnostic tool like Deutz Serdia to clear the fault codes from the ECU memory and verify that the fault does not return.

Parts you might need

(5)
  • Genuine OEM Deutz Speed Sensor

  • Fits Deutz TCD 3.6 L4, TCD7.8L6, and TD2.9L4 engines

  • Fits Deutz TCD2015V06 engine models

  • Compatibility must be confirmed for specific engine model

  • Speed Sensor

    01171283

    Fits Deutz FL413 engines

Get help to fix this fault by requesting a quote

Browse other Deutz-Fahr codes