JCB C031B: Low Flow B Solenoid Not Reaching Target Current/Pressure

The HECU is unable to achieve the target current or pressure when operating the Low Flow B Solenoid. This indicates a problem with the ability of the system to properly control the Low Flow B Solenoid.

1. 1

   The Low Flow B Solenoid

2. 2

   The circuit connected to the Low Flow B Solenoid

3. 3

   The HECU's ability to send the correct signal to the Low Flow B Solenoid

1. 1

   Inspect

   Inspect the Low Flow B Solenoid for physical damage or obstruction.

2. 2

   Test

   Test the Low Flow B Solenoid for proper operation using the appropriate diagnostic tools.

3. 3

   Check

   Check the wiring and connections to the Low Flow B Solenoid for any faults or poor contact.

4. 4

   Verify

   Verify the HECU is sending the correct signal to the Low Flow B Solenoid.