P2BAE-92

JCB P2BAE-92 – Aftertreatment System ECU: System Tampering Level 1 Enacted

Issue description

The aftertreatment system is operating outside of its designed parameters, triggering a 'System Tampering Level 1 Enacted' fault (the -92 suffix indicates Performance or Incorrect Operation). This is generally related to a NOx exceedance where sensors detect nitrogen oxide levels above legal thresholds. The 'tampering' designation indicates unauthorized changes, repeated component faults, or damaged wiring within the NOx Control Monitoring System.

Applies to these machines

  • Tier 4 Engine Machines
  • EcoMAX Engine Machines
  • Tracked Excavators
  • Wheeled Excavators

Check the cause

  1. Scan for all active and stored fault codes, as this system-level code often appears alongside specific component-level codes that pinpoint the root cause

  2. Inspect DEF/AdBlue quality for proper concentration and contamination (must comply with ISO 22241)

  3. Visually inspect the entire aftertreatment system (DEF tank, pump, heater, lines) for physical damage, leaks, or modifications

  4. Examine wiring harnesses and connectors for the NOx sensors, DEF injector, and DEF pump for damage, corrosion, or loose connections

  5. Review live data for upstream/downstream NOx sensor readings, DEF pressure, and DEF injector duty cycle

  6. Inspect the DEF injector nozzle and exhaust port for blockages or white crystallized urea deposits

Repair steps

  1. Address other fault codes

    If other specific fault codes are present (e.g., NOx sensor circuit or DEF pump pressure), diagnose and repair those issues first.

  2. Clean the DEF injector

    Remove the DEF injector from the exhaust. Use a small pick or suitable tool to gently remove crystallized urea deposits from the injector nozzle and exhaust port, then reinstall.

  3. Test the system

    Clear all fault codes with a diagnostic tool. Start the engine, allow it to reach operating temperature, and run the machine under load to force the SCR system to operate and confirm the repair.

  4. Replace faulty components

    If cleaning the injector fails, replace components based on live data findings (e.g., DEF injector if internally faulty, NOx sensors if readings are erratic, or DEF pump if pressure is low).

  5. Clear fault codes

    Perform a final clearing of all diagnostic trouble codes once the repair is complete and verified.

Parts you might need

(6)
  • Diesel Exhaust Fluid (DEF) / AdBlue Injector

    Generic part name; verify OEM part number for specific machine

  • Upstream NOx Sensor

    Generic part name; verify OEM part number for specific machine

  • Downstream NOx Sensor

    Generic part name; verify OEM part number for specific machine

  • Diesel Exhaust Fluid (DEF) / AdBlue Pump

    Generic part name; verify OEM part number for specific machine

  • Diesel Exhaust Fluid (DEF) / AdBlue Heater

    Generic part name; verify OEM part number for specific machine

  • Aftertreatment ECU

    Generic part name; verify OEM part number for specific machine

Get help to fix this fault by requesting a quote

Browse other JCB codes