JCB P3405-87 – Aftertreatment System ECU, Dosing Control Unit (DCU), or Engine ECU: Temperature Too High for Aftertreatment 1 SCR Catalyst DEF Properties
Issue description
The system has detected that the temperature within the SCR (Selective Catalytic Reduction) system has surpassed the acceptable threshold for the DEF to effectively react and reduce NOx emissions. This high-temperature condition hinders the chemical reaction where DEF converts into ammonia, which compromises the proper functioning of the aftertreatment 1 SCR catalyst and negatively affects the efficiency of the emissions control system.
Applies to these machines
5 machines- 406SV Wheel Loader (Kohler KDI-TC 1903E5/26 engine)
- Ecomax Tier 4 engines
- Tracked Excavators with SCR systems
- Wheeled Excavators with SCR systems
- Wheeled Loaders with SCR systems
Check the cause
Verify the fault code using a diagnostic tool (such as JCB ServiceMaster) and note any accompanying fault codes for additional context
Visually inspect the wiring harness and connectors between the temperature sensors, DEF tank head unit, and the aftertreatment ECU for damage, corrosion, or loose connections (especially in areas exposed to pressure washing)
Inspect for any debris or blockages around the aftertreatment components that could restrict airflow and lead to overheating
Check the cooling system for general engine overheating issues or a faulty engine coolant valve
Consider if the machine is operating in excessively high ambient temperatures
Check the DEF quality using a refractometer to ensure it meets the 32.5% urea concentration standard
Repair steps
Test temperature sensors
Using a diagnostic tool, monitor live data from the DEF tank temperature sensor and the exhaust gas temperature sensor within the SCR catalyst. Look for erratic or implausible readings. Test suspected sensor circuits for continuity and check for shorts to ground or open circuits in the wiring harness.
Inspect DEF return line
Check for excessive temperatures in the DEF return line, which could indicate a problem with the DEF cooling circuit (if equipped).
Inspect coolant valve
Check the functionality of the coolant valve used to regulate DEF tank temperature. If it is stuck or malfunctioning, it could lead to overheating of the DEF.
Replace faulty components
Replace any identified faulty temperature sensors. Repair or replace damaged wiring harnesses. If diagnostics point to a faulty DEF tank head unit (which often includes the temperature sensor), replace the entire unit.
Clear codes and verify repair
After replacing components, clear all fault codes using a diagnostic tool. Run the machine and monitor the aftertreatment system temperatures to ensure the fault does not return.
Parts you might need
(6)- SCR Inlet Temperature Sensor320/A9184
Genuine JCB. Suitable for various Tier 4 machinery including generators, tracked excavators, and wheeled loaders with SCR systems.
DEF Tank Head Unit
Varies by machine model. Often contains the DEF level and temperature sensors.
- Temperature Sensor334/C0649
Verify application against specific machine serial number.
Temperature Sensor
333/K3082Verify application against specific machine serial number.
- Temperature Sensor716/30264
Verify application against specific machine serial number.
- Temperature Sensor (NGK)320/C9705
Verify application against specific machine serial number.
Get help to fix this fault by requesting a quote