John Deere 06: Chaffer 1 Open Status Does Not Match Control Unit Command

The Chaffer 1 open status is OFF, but the control unit LC2 has commanded it to be ON. This indicates a discrepancy between the expected and actual state of the Chaffer 1 open function.

1. 1

   The Chaffer 1 open function

2. 2

   The control unit LC2

3. 3

   The connection or signal path between the control unit LC2 and the Chaffer 1 open function

1. 1

   Verify the command signal from the control unit LC2 to the Chaffer 1 open function.

   Check if the control unit LC2 is sending the correct ON command to the Chaffer 1 open function.

2. 2

   Inspect the Chaffer 1 open function for proper operation.

   Ensure that the Chaffer 1 open function is responding to the command and is not physically obstructed or damaged.

3. 3

   Check the connection or signal path between the control unit LC2 and the Chaffer 1 open function.

   Look for any loose, damaged, or disconnected wiring or components in the signal path.