John Deere 06: Reel Fore/Aft Diverter Not Responding to Command
Issue description
The reel fore/aft diverter, identified by cc# 464, is not operating as commanded by the control unit LC1. The system has detected that the diverter is in the OFF position when it should be ON.
Check the cause
The status of the control unit LC1 output signal to the reel fore/aft diverter
The physical position of the reel fore/aft diverter
The connection and integrity of the wiring between the control unit LC1 and the reel fore/aft diverter
Repair steps
Verify the command signal from the control unit LC1 to the reel fore/aft diverter
Use diagnostic tools to confirm that the control unit LC1 is sending the correct ON signal to the reel fore/aft diverter.
Inspect the physical position of the reel fore/aft diverter
Check whether the reel fore/aft diverter is physically in the OFF position and determine if it is mechanically stuck or obstructed.
Check the wiring and connections between the control unit LC1 and the reel fore/aft diverter
Inspect for loose, damaged, or corroded connections that may prevent the signal from reaching the reel fore/aft diverter.
Parts you might need
(0)Get help to fix this fault by requesting a quote
