John Deere 2050.06 – Cab Load Center (CLC) or Basic Load Center (BLC): Circuit Current High

The total electrical current being drawn by accessories and systems connected to the Cab Load Center (CLC) has exceeded its specified limit. Although commonly described as a 'Wiper Blades Fault', this high current condition can be caused by any component on the CLC circuit, with window wipers, auxiliary lighting, and aftermarket accessories being common culprits.

• 6110M
• 6120M
• 6130M
• 6145M
• 6155M
• 6175M
• 6195M
• 6110R
• 6120R
• 6130R
• 6145R
• 6155R
• 6175R
• 6195R
• 6215R
• 7630
• 7730
• 7830
• 7930
• 8130
• 8230
• 8330
• 8430
• 8530
• 8225R
• 8245R
• 8270R
• 8295R
• 8320R
• 8345R
• 9230
• 9330
• 9430
• 9530
• 9630
• 6090MC
• 6100MC
• 6110MC
• 6090RC
• 6100RC
• 6110RC

1. 1

   Restart the engine to verify if the active Diagnostic Trouble Code reappears, as this can sometimes reset communication messages.

2. 2

   Inspect for aftermarket accessories (e.g., flood lights, hazard lights, window wipers) wired directly into the cab's load center, as this is the most common cause of excessive current draw.

1. 1

   Safely park the tractor and turn off the engine.

2. 2

   Remove all operator-customized accessories that draw heavy current from the cab circuits.

   This includes aftermarket flood lights, hazard lights, and window wipers.

3. 3

   Turn the tractor back on and monitor the CommandCenter display to see if the CLC/BLC 002050.06 code clears.

4. 4

   If the code still exists after removing the customized accessories, have a dealer repair the electrical system.

   The issue lies internally within the wiring harness or the Load Center control unit itself, and it may require replacing and reprogramming the CLC/BLC module.