John Deere 522578.02 – CSM: Armrest Navigation Bar Fault

Circuit fault specifically tied to Button 3 on the orientation/navigation bar.

• 6110R
• 6120R
• 6130R
• 6145R
• 6155R
• 6175R
• 6195R
• 6215R
• 8225R
• 8245R
• 8270R
• 8295R
• 8320R
• 8335R
• 8345R
• 8370R
• 8400R
• 8310RT
• 8335RT
• 8360RT

1. 1

   Press and release Button 3 on the armrest navigation bar to attempt a soft reset/recovery of the system

2. 2

   Turn the tractor's ignition switch OFF, wait a moment, and turn it back ON to see if the code clears

3. 3

   Inspect the wiring harness and connections leading to the Armrest Navigation Bar Module and the Cab Switch Module for signs of damage, corrosion, or loose pins

1. 1

   Perform built-in recovery

   Perform the built-in recovery by pressing and releasing the affected button (Button 3).

2. 2

   Cycle ignition

   Cycle the ignition key.

3. 3

   Diagnose hardware failure

   If the fault persists and wiring checks out, the issue is a hardware failure within the Cab Switch Module (CSM) or the Armrest Navigation Bar.

4. 4

   Remove module

   Disconnect the battery and remove the Cab Switch Module from the armrest console.

5. 5

   Repair or replace module

   Send the CSM to a specialized agricultural electronics repair service (e.g., Ilgenfritz Mechatronics) or replace the module with a new or remanufactured OEM part.

6. 6

   Reinstall and verify

   Reinstall the module, reconnect the battery, and verify the fault code is cleared.