John Deere ACU523923.02 – ACU: SCV I Control Lever Switch/Switch Control Fault
Issue description
The fault code indicates an issue within the electrical circuit of the control lever or switch for the number one Selective Control Valve (SCV I). The '.02' suffix points to a circuit conflict or general logic error, meaning the Armrest Control Unit (ACU) has received an unexpected input from the switch that conflicts with other sensor inputs.
Applies to these machines
20 machines- 9120
- 9220
- 9320
- 9420
- 9520
- 9230
- 9330
- 9430
- 9530
- 9630
- 8130
- 8230
- 8330
- 8430
- 8530
- 8120
- 8220
- 8320
- 8420
- 8520
Check the cause
Restart the tractor to see if the fault clears automatically.
Move the SCV I control lever to the neutral position and then attempt to operate it again to help the system recover.
Check for other active fault codes (e.g., low switched supply voltage or a missing CAN message from another controller) which could indicate a related issue.
Visually inspect the wiring harness leading to the SCV I control lever within the armrest for any signs of damage, pinching, or loose connections.
Repair steps
Access the armrest console
Remove the lid from the top of the armrest and undo the three bolts from the bottom of the console.
Lift the console top
Lift the top half of the console up to expose the internal switches and wiring.
Locate and remove the SCV I switch
Identify the switch for SCV I, remove its mounting screws, and carefully unplug the connected wiring harness.
Install the new switch
Connect the wiring harness to the new switch, mount it in the console with its screws, and reassemble the armrest console by securing the top half and reinstalling the bolts from the bottom.
Test operation
Start the tractor and test the function of the new SCV I lever to ensure the fault code does not return.
Parts you might need
(3)- E-SCV Remote Control SwitchAL201582
Example OEM part. Exact part number varies by tractor model; confirm with dealer.
Example OEM part. Exact part number varies by tractor model; confirm with dealer.
May be required if the ACU module itself is faulty.
Get help to fix this fault by requesting a quote