005246.00

John Deere 005246.00 – ECU: SCR Operator Stage #3 Derate Notification

Issue description

The Engine Control Unit (ECU) has triggered an SCR Operator Stage #3 Derate Notification. This is an informational countdown alerting the operator of the time remaining before the engine enters its final and most severe derate stage. This condition initiates a programmed reduction in engine performance to prevent damage and ensure emissions compliance, and is driven by another underlying active fault in the engine or after-treatment system.

Applies to these machines

  • 9470RT
  • 9520RT
  • 9570RT
  • 9R Series
  • 9RT Series
  • 9RX Series
  • 8R Series
  • 8RT Series
  • R-series tractors
  • combines
  • construction equipment

Check the cause

  1. Scan the ECU for all active and stored fault codes to identify the primary causal fault (this code is a secondary alert)

  2. Check Diesel Exhaust Fluid (DEF) quality and level using a refractometer (concentration must be 32.5% and meet ISO 22241 standards)

  3. Inspect upstream and downstream NOx sensors and their wiring for damage or corrosion

  4. Examine the DEF system (pump, dosing valve, lines, and filter) for leaks, blockages, or physical damage

  5. Check for failed or incomplete Diesel Particulate Filter (DPF) regeneration

Repair steps

  1. Diagnose and repair primary fault

    Using a diagnostic scanner, identify and resolve the root cause by addressing the other active fault codes first (e.g., test and repair NOx sensor circuits or inspect the DEF pump and lines).

  2. Perform system tests

    After replacing any faulty components, use a diagnostic scanner to perform system-specific tests, such as a DEF pump pressure test or a NOx sensor calibration.

  3. Clear fault codes and reset timers

    Once the underlying issue is resolved, use the diagnostic scanner to clear all fault codes. A specific 'SCR Fault Reset' or 'Reset Inducement Timers' function is required to fully clear the derate condition.

  4. Verify the repair

    Operate the machine to ensure that the fault code does not return and that full engine power is restored.

Parts you might need

(11)

Get help to fix this fault by requesting a quote

Browse other John Deere codes