John Deere 000630.02 – ATC: ATC Module Software Configuration Fault
Issue description
The system has detected an internal fault related to the module software configuration or calibration data. The module's internal software or stored configuration settings have become corrupt, are missing, or have been reset to factory defaults. This issue affects the proper operation of the module and can be caused by an interruption during a reprogramming event or an internal hardware fault within the module itself.
Applies to these machines
47 machines- 8110T
- 8120T
- 8210T
- 8220T
- 8230T
- 8310T
- 8320T
- 8330T
- 8410T
- 8420T
- 8430T
- 8520T
- 9300T
- 9320T
- 9400T
- 9420T
- 9520T
- 9620T
- 8110
- 8120
- 8210
- 8220
- 8310
- 8320
- 8410
- 8420
- 8520
- 9100
- 9120
- 9200
- 9220
- 9230
- 9300
- 9320
- 9330
- 9400
- 9420
- 9430
- 9520
- 9530
- 9620
- 9630
- 6R Series
- 6M Series
- 5E Series
- 5M Series
- 4940 Sprayer
Check the cause
Restart the tractor by cycling the power off and on to see if the fault clears automatically
Review the ClimaTrak™ or ATC settings on the tractor's display to check if they have been altered or reset to default values
Inspect the condenser at the front of the tractor for cleanliness
Ensure the cab's recirculation air filter is not plugged
Monitor the system to see if the fault indicator light blinks or the code reappears after initial checks
Repair steps
Perform Preliminary Diagnostics
Complete the initial diagnostic checks, including power cycling the machine and inspecting the condenser and air filters.
Contact John Deere Dealer
If the code persists after preliminary checks, it is necessary to contact a John Deere dealer for service.
Module Recalibration
A John Deere technician will need to connect to the tractor's diagnostic system to perform a CLIMATRAK calibration procedure using specialized diagnostic tools and software.
Module Reprogramming/Replacement
If recalibration fails, the module may need to be reprogrammed. In cases of hardware failure within the module, it will require replacement.
Parts you might need
(4)Fits a wide range of 8000 and 9000 series tractors, including T models. Verify fitment by serial number.
Climate Control Module
RE176357Fits various 8000 and 9000 series tractors, including T models. Verify fitment by serial number.
Heater/Air Conditioning Module Assembly (ATC)
RE292231Specifically listed for the John Deere 4940 Sprayer.
Housing, Upper, ATC Module
R191491Component of the ATC module assembly.
Get help to fix this fault by requesting a quote
