John Deere 96.17 – CCU: Fuel tank fuel level is low

The Chassis Control Unit detects that the fuel level percentage has fallen below a critical threshold (typically below 3%). It serves as an early warning advisory to prevent the vehicle from running out of fuel.

• 6110M
• 6120M
• 6130M
• 6145M
• 6155M
• 6175M
• 6195M
• 6110R
• 6120R
• 6130R
• 6145R
• 6155R
• 6175R
• 6195R
• 6215R
• 7220
• 7320
• 7420
• 7520
• 3520
• 3522

1. 1

   Physically check the fuel tank to confirm if the fuel level is actually low

2. 2

   Observe if the dash fuel gauge matches the physical fuel level. If the tank is full but the gauge reads empty, suspect a stuck float or a wiring issue

1. 1

   Refuel the vehicle

   Add fuel to the vehicle's tank.

2. 2

   Cycle the power

   Turn the key switch off, wait a moment, and turn the tractor power back on to allow the CCU to read the new fuel level and clear the code from the CommandCenter™ page.

3. 3

   Monitor

   If the code persists after the tank has been filled and the power cycled, the fuel level sensor or its wiring harness may be faulty and require dealer-level diagnosis.