CAB523630

John Deere CAB523630 – CAB: Warning Lighting System-Road Diagnostics Fault

Issue description

This fault code indicates an issue within the Warning Lighting System-Road Diagnostics, specifically affecting cab roof lights 1 and 6 (circuit 581). The Cab Control Unit (CAB) logs this code when it detects an open circuit, a short to power, or a failure of the lights to turn on or off as commanded. The exact nature of the failure is determined by the accompanying FMI code.

Applies to these machines

  • 9570 STS
  • 9670 STS
  • 9770 STS
  • 9870 STS
  • S550
  • S660
  • S670
  • S680
  • S690

Check the cause

  1. Note the specific FMI code (03, 05, or 06) on the display to narrow down the diagnostic procedure

  2. Cycle the key switch power to see if the fault is intermittent and clears

  3. Perform a visual inspection of cab roof lights 1 and 6, their connectors, and visible wiring for damage, corrosion, or loose connections

  4. If FMI 06 is present (lights off when commanded on), check for burnt-out bulbs

Repair steps

  1. Inspect and replace bulbs

    For FMI 05 (Open Circuit) or FMI 06 (Off When Commanded On): Check the bulbs for cab roof lights 1 and 6. Replace them if they are burnt out.

  2. Check lighting circuit fuses

    For FMI 05 or 06: Inspect any related fuses for the lighting circuits to ensure they are not blown.

  3. Test for power and ground

    For FMI 05 or 06: Using a multimeter, check for power and a good ground at the light sockets when commanded on. If there is no power, trace the wiring back toward the CAB. If there is power but no ground, inspect the ground connections for the lights and the cab.

  4. Inspect connectors and wiring harness

    For FMI 05 or 06: Disconnect and inspect the light connectors and intermediate harness connectors for corrosion, pushed-out pins, or damage. Inspect wiring harness (cc# 581) between the CAB and lights for chafing or breaks.

  5. Check for short to power

    For FMI 03 (On When Commanded Off): Inspect the wiring harness for damaged insulation that could be shorting circuit 581 to another power source.

  6. Inspect Cab Control Unit

    For FMI 03: If no wiring faults are found for a short to power, the Cab Control Unit (CAB) itself may have a faulty output requiring further testing by a qualified technician.

Parts you might need

(2)
  • OEM John Deere part. Alternate OEM numbers include AH127718, AH128327, AH128328, AH162231, AH212522, RE181281, AH212523.

  • Cab Roof Light (Aftermarket)

    A-WL1380

    Replaces AH159332, AH128328, AH128327. Other aftermarket options include WN-AH159332, TL9000, and WN-AH212522-PEX.

Get help to fix this fault by requesting a quote

Browse other John Deere codes