E:9103

Kubota E:9103 – Engine Control Unit (ECU): Intake Air Temperature Sensor System Error

Issue description

Indicates an error with the Intake Air Temperature Sensor System. The sensor measures the temperature of the air entering the engine after it passes through the turbocharger, which the engine computer uses to calculate air density and adjust fuel injection. The engine may still start and the machine may move, but operators are advised not to perform any jobs and to contact a dealer immediately.

Applies to these machines

  • SSV65
  • SSV75
  • SVL65-2
  • SVL75-2
  • SVL95-2
  • SVL95-2s
  • R430
  • R530
  • R630

Check the cause

  1. Connect a diagnostic tool and monitor the live data for 'Intake air temperature' and 'Intake air temperature sensor output voltage'.

  2. Compare the output voltage to factory specifications. At an actual intake air temperature of 20 °C (68 °F), the output voltage should be approximately 3.1 V.

  3. Inspect the sensor's 2-pin waterproof connector and the engine wiring harness for corrosion, moisture, or broken wires, which can cause false readings.

Repair steps

  1. Ensure the machine is turned off, the key is removed, and a 'DO NOT OPERATE' tag is placed on the controls.

  2. Locate the intake air temperature sensor.

    It is mounted on the intake manifold or intercooler air pipe.

  3. Carefully disconnect the gray square 2-pin wiring harness plug from the sensor.

  4. If the boost sensor hose is routed nearby or integrated, carefully remove the hose.

    This prevents damaging it during the repair.

  5. Unscrew and remove the faulty intake air temperature sensor.

  6. Prepare the new sensor.

    Always replace the gaskets/sealing rings with new ones to prevent boost leaks under construction vibration.

  7. Thread the new sensor into the manifold and tighten it.

    Tighten to the factory torque specification of 30 to 39 N·m (22 to 28 lbf·ft).

  8. Reconnect the 2-pin wiring harness plug and clear the fault codes.

Parts you might need

(1)

Get help to fix this fault by requesting a quote

Browse other Kubota codes