Massey Ferguson 00.01.42 – Dash (Instrument Cluster): Service Counter Issue.

This code indicates that the tractor's internal maintenance counter has reached its programmed interval limit, or there is a memory/configuration error regarding the service counter. Most commonly, it means scheduled maintenance is due, or maintenance was recently performed but the counter was never reset in the system.

• 7714
• 7715
• 7715S
• 7716
• 7716S
• 7718
• 7718S
• 7719
• 7720
• 7720S
• 7722
• 7722S
• 7724
• 7724S
• 7726
• 7726S
• Tier 4 (2015-2021)
• 4707
• 4708
• 4709
• 4710
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 5710SL
• 5711SL
• 5712SL
• 5713SL
• 7614
• 7615
• 7616
• 7618
• 7619
• 7620
• 7622
• 7624
• 7626

1. 1

   Verify Maintenance Schedule: Check the tractor's current operating hours against the OEM service schedule to see if routine maintenance (e.g., engine oil, hydraulic fluid, filters) is currently due.

2. 2

   Check Recent Service History: Determine if the tractor was recently serviced by an independent mechanic or operator who may have forgotten to perform the electronic reset procedure.

3. 3

   Scan Tool Verification: Connect a compatible commercial agricultural diagnostic tool (such as Jaltest or the AGCO EDT) to verify the status of the maintenance counters in the Dash ECU.

1. 1

   Perform Required Maintenance

   If the tractor is due for service, perform all necessary fluid and filter changes according to the operator's manual.

2. 2

   Reset the Service Counter

   Connect a diagnostic tool (e.g., Jaltest AGV) to the tractor's diagnostic port. Navigate to the Dash/Instrument Cluster module and select the "Maintenance Reset" function. Execute the reset command to clear the maintenance counters. Note: Simply clearing the fault code from the memory will not fix the issue; the specific maintenance counter reset function must be executed, otherwise the warning will persist.

3. 3

   Verify Dash Configuration

   If the code immediately returns after a successful reset, or if the dash refuses to accept the reset, there may be a hardware failure or configuration corruption within the instrument cluster itself (often accompanied by related codes like 00.01.43 "Problem With Dash Configuration"). In this case, the instrument cluster may need to be reprogrammed by a dealer or replaced.