Massey Ferguson 00.03.42 – Dash (Instrument Cluster): Service Counter Issue

Indicates that the tractor's internal engine hour counter has reached a predefined factory maintenance interval, or there is a configuration issue with the service counter itself. It serves as a notification that routine maintenance is due and the counter needs to be reset.

• 7714
• 7715
• 7715S
• 7716
• 7716S
• 7718
• 7718S
• 7719
• 7720
• 7720S
• 7722
• 7722S
• 7724
• 7724S
• 7726
• 7726S
• Tier 4 (2015-2021)
• 5710SL
• 5711SL
• 5712SL
• 5713SL

1. 1

   Check the tractor's current engine hours on the dash or the System Information Screen (SIS)

2. 2

   Compare the current hours against the factory-recommended service intervals in your owner's manual (e.g., 250 hours for engine oil and fuel filters, and 500 hours for hydraulic/transmission filters)

3. 3

   Determine if the required maintenance was already performed recently but the technician simply forgot to reset the service counter

1. 1

   Perform Required Maintenance

   If the tractor is due for service, complete the necessary maintenance tasks (e.g., changing engine oil, hydraulic fluid, and replacing relevant filters, greasing fittings).

2. 2

   Access the Dash/SIS

   Turn on the tractor's ignition and navigate to the System Information Screen (SIS) or dash configuration menu.

3. 3

   Perform a Maintenance Reset

   Attempt to reset the service counter through the dash interface.

4. 4

   Use a Diagnostic Tool (If Required)

   If the dash interface does not allow a manual reset, connect a compatible agricultural diagnostic scanner (such as Jaltest AGV or the dealer's AGCO Electronic Diagnostic Tool) to the tractor's diagnostic port.

5. 5

   Clear the Code

   Run the "Maintenance Reset" function in the diagnostic software to reset the service counter, which will clear the 00.03.42 fault code from the Dash.