Massey Ferguson 00.X.42 – Dash: Service Counter Issue

This is a maintenance-related notification indicating that the tractor's internal service interval timer has expired (meaning scheduled maintenance is due) or that there is a configuration/communication glitch with the dashboard's service counter tracking.

• 7714
• 7715
• 7715S
• 7716
• 7716S
• 7718
• 7718S
• 7719
• 7720
• 7720S
• 7722
• 7722S
• 7724
• 7724S
• 7726
• 7726S
• Tier 4 (2015-2021)
• 4707
• 4708
• 4709
• 4710
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 5710SL
• 5711SL
• 5712SL
• 5713SL
• 7614
• 7615
• 7616
• 7618
• 7619
• 7620
• 7622
• 7624
• 7626

1. 1

   Verify Operating Hours: Check the tractor's total operating hours on the dash display and compare them against the factory-recommended service intervals (e.g., 250 hours for engine oil/fuel filters, 500 hours for hydraulic/transmission fluid and filters).

2. 2

   Check Maintenance History: Determine if the physical maintenance was recently performed but the technician forgot to reset the electronic counter.

3. 3

   Review the SIS: Check the System Information Screen (SIS) or Performance Monitor on the dash for specific service reminder prompts to see exactly which interval (engine, transmission, etc.) triggered the code.

4. 4

   Check for Accompanying Codes: Look for codes like 00.X.43 or 00.X.45 ('Problem With Dash Configuration'). If these are present, the dash module itself may have lost its configuration data.

1. 1

   Perform Scheduled Maintenance

   Complete the required service based on the tractor's current hour meter (e.g., changing engine oil, hydraulic fluid, and replacing relevant filters).

2. 2

   Power the Dash

   Turn the ignition key to the ON position without starting the engine.

3. 3

   Access the SIS

   Use the navigation buttons on the console or steering column to access the dash control center / System Information Screen (SIS).

4. 4

   Navigate to Service Menu

   Scroll through the menus to find the "Service" or "Maintenance" tab.

5. 5

   Reset the Counter

   Select the specific service interval that has expired. Press and hold the "OK" or "Reset" button until the counter resets to zero or updates to the next interval target.

6. 6

   Cycle Ignition

   Turn the ignition key off, wait 10 seconds, and turn it back on to verify the 00.X.42 fault code has cleared from the active DTC list.

7. 7

   Dealer Intervention

   If the code cannot be cleared manually through the dash, or if the dash configuration is corrupted, a dealer must connect the Massey Ferguson Electronic Diagnostic Tool (EDT) to reflash or reconfigure the dash module.