Massey Ferguson 00.X.45 – Dash: Problem With Dash Configuration (Dash)

The instrument panel has lost its configuration parameters, has an incorrect tractor code selected, or has suffered an internal memory/programming error.

• 7714
• 7715
• 7715S
• 7716
• 7716S
• 7718
• 7718S
• 7719
• 7720
• 7720S
• 7722
• 7722S
• 7724
• 7724S
• 7726
• 7726S
• Tier 4 (2015-2021)
• 4707
• 4708
• 4709
• 4710
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 5710SL
• 5711SL
• 5712SL
• 5713SL
• 7614
• 7615
• 7616
• 7618
• 7619
• 7620
• 7622
• 7624
• 7626

1. 1

   Check system voltage at the battery and alternator regulator to rule out voltage spikes or drops that can corrupt dash memory

2. 2

   Verify CAN BUS communication between the Dash and Autotronic/DCC3 controllers

3. 3

   Use a diagnostic tool to check for an incorrect tractor code selection or parameter table error in the instrument panel settings

4. 4

   Ensure no one attempted to program or configure the instrument panel while the engine was running

1. 1

   Connect Diagnostic Tool

   Connect a compatible diagnostic scanner (such as AGCO EDT or Jaltest) to the tractor's diagnostic port.

2. 2

   Read and Save Data

   Access the Dash/Instrument Panel module to read the ECU failure memory and check the current parameter table.

3. 3

   Reconfigure the Dash

   Reprogram the instrument panel with the correct tractor code and configuration settings for your specific model. Important: Ensure the engine is OFF and the key is in the ON position during programming.

4. 4

   Clear Codes

   Clear the fault codes, cycle the ignition key, and verify if the 00.X.45 code returns.

5. 5

   Replace the Cluster (If Necessary)

   If the configuration cannot be saved due to an internal EEPROM/RAM failure, the instrument cluster must be replaced. Remove the instrument panel cladding/cover, remove the retaining screws holding the cluster in place, disconnect the plug-and-play wiring harness, install the new instrument cluster and use the diagnostic tool to program the new unit to the tractor's specifications.