Massey Ferguson 06.01.E1 – Transmission Controller: Transmission Internal Software Issue (TRANS)

Indicates that the onboard diagnostic (OBD) system has detected an internal software anomaly, corruption, or unresponsiveness within the transmission's logic system.

• 7714
• 7715
• 7715S
• 7716
• 7716S
• 7718
• 7718S
• 7719
• 7720
• 7720S
• 7722
• 7722S
• 7724
• 7724S
• 7726
• 7726S
• Tier 4 (2015-2021)
• 7614
• 7615
• 7616
• 7618
• 7619
• 7620
• 7622
• 7624
• 7626
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613

1. 1

   Connect a specialized diagnostic tool (such as the AGCO Electronic Diagnostic Tool - EDT) to the tractor's diagnostic port to retrieve and confirm the active 06.01.E1 code.

2. 2

   Check if the transmission module is communicating properly with the CAN BUS system or if it has become unresponsive (bricked) due to a software crash.

3. 3

   Verify that the transmission module is receiving proper supply voltage, as low voltage can sometimes trigger internal module errors (check for accompanying codes like T130).

1. 1

   Software Flash/Update

   Using the AGCO EDT (Electronic Diagnostic Tool), check for available software updates for the transmission module.

2. 2

   Reprogram the Module

   Apply the latest software package to the Armrest and Transmission controllers. Note: ensure the diagnostic tool is updated to the latest version before attempting the flash.

3. 3

   Clear Codes and Test

   Once the flash is complete, clear the DTCs and cycle the tractor's power to see if the code returns.

4. 4

   Module Replacement

   If the transmission module will not accept the software flash, remains unresponsive, or flags a hard internal failure (such as accompanying code T259), the physical transmission controller must be replaced and programmed by an authorized dealer.