Massey Ferguson 0A.2X.13 – Mid Mount Valve Module or general hydraulic control module: External Hydraulic Valve 2 Issue

Malfunction, connection problem, or sensor value discrepancy (such as a spool position sensor value issue) associated with the second external hydraulic spool valve.

• 7724S
• 5712SL
• 7722
• 7722S
• 5713SL
• 7720S
• 7716
• 7718
• T4
• 7715
• 5710SL
• 7726
• 7726S
• 5711SL
• 7718S
• 7719
• 7714
• 7716S
• 7720
• Tier 4 (2015-2021)
• 7715S
• 7724
• 4707
• 4708
• 4709
• 4710
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 7614
• 7615
• 7616
• 7618
• 7619
• 7620
• 7622
• 7624
• 7626

1. 1

   Verify the electrical connections on the hydraulic valve, as related codes explicitly point to connection problems on hydraulic valves.

2. 2

   Check the spool position sensor values for Valve 2, as sensor value issues are a common trigger for these spool valve errors.

3. 3

   Verify communication between the Dash and the Valve Module (Mid Mount or Rear) to ensure the CAN bus or wiring harness is not damaged.

1. 1

   Retrieve code

   Retrieve the code using a compatible diagnostic tool or interface device.

2. 2

   Inspect and clean connector

   Inspect and clean the wiring harness connector at External Hydraulic Valve 2.

3. 3

   Test sensor

   Test the spool position sensor for proper voltage/resistance.

4. 4

   Replace components

   Replace the sensor or the entire spool valve assembly if internal electrical/mechanical failure is confirmed.

5. 5

   Clear DTCs

   Clear the DTCs using the diagnostic tool after the repair is completed.