Massey Ferguson 0A.51.1F: External Hydraulic Valve 5 Issue

Indicates a malfunction, fault, or potential connection problem associated with the 5th external hydraulic remote valve (spool valve) on the tractor.

• 7724S
• 5712SL
• 7722
• 7722S
• 5713SL
• 7720S
• 7716
• 7718
• T4
• 7715
• 5710SL
• 7726
• 7726S
• 5711SL
• 7718S
• 7719
• 7714
• 7716S
• 7720
• Tier 4 (2015-2021)
• 7715S
• 7724
• 4707
• 4708
• 4709
• 4710
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 7614
• 7615
• 7616
• 7618
• 7619
• 7620
• 7622
• 7624
• 7626

1. 1

   Use a compatible Massey Ferguson diagnostic tool to confirm the presence of 0A.51.1F and check for any other related codes (such as 0A.41.FF, which indicates a connection problem).

2. 2

   Inspect the wiring harness, connectors, and pins leading to External Hydraulic Valve 5 for corrosion, damage, or loose connections.

3. 3

   Do not clear the DTC immediately without addressing the root cause, as the fault will recur or could lead to further equipment damage.

1. 1

   Locate valve

   Locate External Hydraulic Valve 5 at the rear remote valve stack.

2. 2

   Repair wiring or connectors

   Repair or replace any damaged wiring or connectors found during the diagnostic inspection.

3. 3

   Replace hydraulic valve

   If the wiring is intact and the valve solenoid is receiving the correct voltage/signal, the hydraulic valve itself (or its solenoid) may have failed internally and will need to be replaced.

4. 4

   Connect diagnostic tool

   After repairing the connection or replacing the valve, connect the diagnostic tool to the tractor's onboard diagnostic system.

5. 5

   Clear DTCs and verify

   Clear the DTCs and operate the hydraulic system to verify the fault code does not return.