Massey Ferguson 0A.62.19: External Hydraulic Valve 6 Issue

The tractor's onboard diagnostic system has detected a malfunction, electrical fault, or operational error specifically associated with the number 6 external hydraulic remote valve (spool valve).

• 7724S
• 5712SL
• 7722
• 7722S
• 5713SL
• 7720S
• 7716
• 7718
• T4
• 7715
• 5710SL
• 7726
• 7726S
• 5711SL
• 7718S
• 7719
• 7714
• 7716S
• 7720
• Tier 4 (2015-2021)
• 7715S
• 7724
• 4707
• 4708
• 4709
• 4710
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 7614
• 7615
• 7616
• 7618
• 7619
• 7620
• 7622
• 7624
• 7626

1. 1

   Retrieve and verify codes using a compatible diagnostic tool, checking for related electrical codes like 0A.41.FF which point to connection problems.

2. 2

   Inspect the wiring harness and electrical connector at the #6 external hydraulic valve for corrosion, backed-out pins, or wire chafing.

3. 3

   Verify that the hydraulic fluid is at the correct level and that the hydraulic filters are not clogged, as low fluid or flow restrictions can cause valve operation issues.

1. 1

   Relieve hydraulic pressure

   Relieve hydraulic system pressure before servicing the valve block.

2. 2

   Repair or replace wiring

   Repair or replace the electrical connector/wiring harness to Valve 6 if a connection issue is found.

3. 3

   Replace electronic spool valve

   If the wiring is intact, the electronic spool valve (or its solenoid) is likely faulty and must be removed and replaced.

4. 4

   Clear DTCs and test

   After replacement, clear the DTCs using a compatible Massey Ferguson diagnostic interface and test the hydraulic remote for proper operation.