Massey Ferguson 0A.8X.20: External Hydraulic Valve 8 Issue

Indicates a fault, malfunction, or connection problem within the circuit of the 8th external hydraulic remote/spool valve.

• 7724S
• 5712SL
• 7722
• 7722S
• 5713SL
• 7720S
• 7716
• 7718
• T4
• 7715
• 5710SL
• 7726
• 7726S
• 5711SL
• 7718S
• 7719
• 7714
• 7716S
• 7720
• Tier 4 (2015-2021)
• 7715S
• 7724
• 4707
• 4708
• 4709
• 4710
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 7614
• 7615
• 7616
• 7618
• 7619
• 7620
• 7622
• 7624
• 7626

1. 1

   Use a compatible Massey Ferguson diagnostic tool or interface device to retrieve and confirm the active 0A.8X.20 code.

2. 2

   Inspect the wiring harness, solenoid connector, and pins at External Hydraulic Valve 8 for corrosion, damage, or loose connections.

1. 1

   Locate valve

   Locate External Hydraulic Valve 8 on the rear hydraulic remote stack.

2. 2

   Disconnect connector

   Disconnect the electrical connector to the valve's solenoid.

3. 3

   Clean and repair wiring

   Clean the contacts and repair any broken or chafed wiring in the harness leading to the valve.

4. 4

   Replace solenoid or valve

   If the wiring is intact, the solenoid or the valve body itself may have failed internally and will need to be replaced.

5. 5

   Clear DTCs

   After repairing the connection or replacing the valve, use a compatible diagnostic scanner to clear the DTCs from the system.

6. 6

   Consult manual or technician

   Consult the specific tractor's service manual or a qualified technician if the code persists after clearing.