Massey Ferguson 1B.01.01 – Linkage/PTO/Light Module: Issue With Configuration Stored In The Linkage/PTO/Light Module On The B-Pillar

This indicates a memory, software, or configuration storage error within the module responsible for managing the tractor's rear linkage, PTO, and lighting systems.

• 7724S
• 5712SL
• 7722
• 7722S
• 5713SL
• 7720S
• 7716
• 7718
• T4
• 7715
• 5710SL
• 7726
• 7726S
• 5711SL
• 7718S
• 7719
• 7714
• 7716S
• 7720
• Tier 4 (2015-2021)
• 7715S
• 7724
• 4707
• 4708
• 4709
• 4710
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 7614
• 7615
• 7616
• 7618
• 7619
• 7620
• 7622
• 7624
• 7626

1. 1

   Check for related accompanying codes such as 1B.01.02 (Issue When Storing Configuration), 1B.01.04 (LIN BUS Communication Issue), or 1B.00.05 (Internal Issue With The Module)

2. 2

   Inspect the LIN BUS communication wiring harness and connectors between the module and the B-Pillar Button Panel for damage, corrosion, or loose pins

3. 3

   Verify the module's software and configuration data using a dealer diagnostic tool (AGCO Electronic Diagnostic Tool) to see if it has lost data or needs re-flashing

1. 1

   Connect the AGCO diagnostic tool to the tractor's diagnostic port.

2. 2

   Attempt to clear the code and re-store/re-calibrate the configuration settings for the Linkage/PTO/Light Module.

3. 3

   If the configuration cannot be stored (often accompanied by code 1B.01.02), or if an internal module failure is present, the physical Linkage/PTO/Light Module on the B-Pillar must be replaced.

4. 4

   Remove the B-Pillar trim panels on the right-hand side of the cab to access the module.

5. 5

   Disconnect the LIN BUS and power harnesses, swap the module, and use the diagnostic tool to program the new module to the tractor's specifications.