Massey Ferguson 1B.02.03 – Linkage/PTO/Light Module: Issue With Configuration Stored In The Linkage/PTO/Light Module On The B-Pillar
Issue description
Indicates a configuration error, memory corruption, or a programming mismatch within the module responsible for controlling the tractor's linkage, PTO, and lighting systems.
Applies to these machines
41 machines- 7724S
- 5712SL
- 7722
- 7722S
- 5713SL
- 7720S
- 7716
- 7718
- T4
- 7715
- 5710SL
- 7726
- 7726S
- 5711SL
- 7718S
- 7719
- 7714
- 7716S
- 7720
- Tier 4 (2015-2021)
- 7715S
- 7724
- 4707
- 4708
- 4709
- 4710
- 5608
- 5609
- 5610
- 5611
- 5612
- 5613
- 7614
- 7615
- 7616
- 7618
- 7619
- 7620
- 7622
- 7624
- 7626
Check the cause
Connect the Massey Ferguson/AGCO diagnostic tool (EDT) to verify if the module has lost its programming, requires a software update, or if the configuration data has been corrupted.
Repair steps
Re-flash or reconfigure module
Use the dealer diagnostic tool to re-flash or reconfigure the B-Pillar module.
Replace module
If the module cannot accept or store the configuration, the module itself must be replaced.
Parts you might need
(1)Linkage/PTO/Light Control Module (B-Pillar)
If replacement is necessary, the new module will likely require dealer programming/configuration upon installation to match the tractor's specific linkage and PTO options.
Get help to fix this fault by requesting a quote
