Massey Ferguson A.60.1F: External Hydraulic Valve 6 Issue

Indicates a fault—such as a connection problem, electrical failure, or mechanical malfunction—specifically located at the 6th external hydraulic spool valve.

• 5710SL
• 5711SL
• 5712SL
• 5713SL
• T4
• 4707
• 4708
• 4709
• 4710
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 7614
• 7615
• 7616
• 7618
• 7619
• 7620
• 7622
• 7624
• 7626
• 7714
• 7715
• 7715S
• 7716
• 7716S
• 7718
• 7718S
• 7719
• 7720
• 7720S
• 7722
• 7722S
• 7724
• 7724S
• 7726
• 7726S

1. 1

   Use a compatible Massey Ferguson diagnostic tool to retrieve the code and confirm it is active

2. 2

   Check the wiring harness and electrical connectors leading to External Hydraulic Valve 6 for connection problems

3. 3

   Consult the tractor's specific service manual to interpret the exact nature of the fault before tearing down the valve block

1. 1

   Clear the Code

   Attempt to clear the DTC using your diagnostic interface to see if it is a hard fault or an intermittent electrical glitch.

2. 2

   Inspect the Valve Block

   Locate the rear remote valve block and identify the "slice" (section) corresponding to Valve 6.

3. 3

   Check the Pilot Pressure Control

   Inspect the pilot pressure control unit on the electric spool valve for damage or leaks.

4. 4

   Replace the Spool Slice

   If the electrical slice head has failed internally, the specific slice must be removed from the valve bank and replaced.

5. 5

   Programming

   If replacing an electric spool slice (e.g., part 3797234M6), the new unit must be programmed to the tractor before it will function.