Massey Ferguson A.62.12: External Hydraulic Valve 6 Issue
Issue description
Indicates a fault or potential issue specifically located at the 6th external hydraulic remote/valve, suggesting an electrical connection, solenoid, or spool actuation failure.
Applies to these machines
40 machines- 5710SL
- 5711SL
- 5712SL
- 5713SL
- T4
- 4707
- 4708
- 4709
- 4710
- 5608
- 5609
- 5610
- 5611
- 5612
- 5613
- 7614
- 7615
- 7616
- 7618
- 7619
- 7620
- 7622
- 7624
- 7626
- 7714
- 7715
- 7715S
- 7716
- 7716S
- 7718
- 7718S
- 7719
- 7720
- 7720S
- 7722
- 7722S
- 7724
- 7724S
- 7726
- 7726S
Check the cause
Connect a compatible diagnostic tool or interface device to the tractor to retrieve and verify the active DTCs.
Inspect the wiring harness and connectors leading to External Hydraulic Valve 6, as related hydraulic valve codes frequently indicate a "Connection problem on a hydraulic valve".
Check for physical damage, corrosion, or loose pins at the valve's solenoid connector.
Repair steps
Repair wiring or connectors
Repair any damaged wiring/connectors found during the diagnostic check.
Replace valve solenoid/spool
Replace the faulty valve solenoid/spool if the electrical feed is verified to be intact.
Parts you might need
(1)External Hydraulic Valve 6 / Hydraulic Valve 6 Spool
Depending on the exact tractor configuration, this may require replacing the specific electronic spool slice on the rear remote valve stack.
Get help to fix this fault by requesting a quote
