Massey Ferguson B.00.13 – Mid Mount Valve Module: Loader Mid Mount Electro Valve Supply Solenoid Open Circuit

The tractor's onboard diagnostic system has detected an incomplete electrical path (open circuit) in the power supply to the 12V solenoid that operates the mid-mount electro-hydraulic valve for the loader.

• 5710SL
• 5711SL
• 5712SL
• 5713SL
• T4
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 5400 series
• 5425
• 5435
• 5700SL series
• 6200 series
• 6400 series
• 6600 series
• 7600 series
• 7700 series

1. 1

   Inspect the wiring harness and connectors leading to the loader mid-mount electro valve for breaks, disconnected plugs, or damaged pins

2. 2

   Verify the voltage from the loader selector switch in the cab

3. 3

   Ensure the wiring between the Dash and the Mid Mount Valve Module is intact to rule out communication failures

1. 1

   Preparation

   De-energize the machine before starting any installation work. Ensure the tractor is turned off and the battery is disconnected or the system is de-energized.

2. 2

   Replacement

   Locate the mid-mount electro valve block and replace the faulty 12V supply solenoid valve.

3. 3

   Clear Codes

   Retrieve and clear codes using a diagnostic tool or interface device compatible with Massey Ferguson tractors.