Massey Ferguson B.00.16 – Dash / Mid Mount Valve Module: No Communication Between The Dash and The Mid Mount Valve Module

The tractor's onboard diagnostic system has detected a loss of signal or data exchange between the dashboard interface and the module responsible for controlling the mid-mount valves (which are typically used for loader operations).

• 5710SL
• 5711SL
• 5712SL
• 5713SL
• T4
• 5608
• 5609
• 5610
• 5611
• 5612
• 5613
• 4700 series
• 5700SL series
• 7600 series
• 7700 series

1. 1

   Use a compatible Massey Ferguson diagnostic tool or interface device to confirm B.00.16 is active.

2. 2

   Inspect the wiring harness connecting the Dash to the Mid Mount Valve Module.

3. 3

   Look for physical damage, disconnected plugs, or corrosion at the module connectors that would interrupt the communication network.

1. 1

   Locate components

   Locating the Mid Mount Valve Module and the Dash communication ports.

2. 2

   Test communication lines

   Testing the communication lines (CAN bus) between the two modules for continuity.

3. 3

   Repair wiring

   Repairing any broken wires or replacing damaged connector pins.

4. 4

   Replace module

   If the wiring is fully intact and power/ground are verified, the Mid Mount Valve Module or the Dash itself may have an internal failure requiring replacement.

5. 5

   Clear codes

   Clear the DTCs using a diagnostic tool after the repair is completed.