Massey Ferguson V213 – Implement/hydraulic control module or main vehicle control unit: External Hydraulic Valve 2 Issue
Issue description
Indicates a malfunction or fault within the second external hydraulic remote valve circuit, typically caused by a connection problem on the hydraulic valve or an issue with the spool position sensor value.
Applies to these machines
40 machines- 7616
- 5612
- 7622
- Interim Tier 4 (2012-2015)
- 7614
- 5611
- 7615
- 5610
- 5613
- 7620
- 5609
- 7618
- 5608
- 7619
- 7626
- 7624
- 4707
- 4708
- 4709
- 4710
- 5710SL
- 5711SL
- 5712SL
- 5713SL
- 7714
- 7715
- 7715S
- 7716
- 7716S
- 7718
- 7718S
- 7719
- 7720
- 7720S
- 7722
- 7722S
- 7724
- 7724S
- 7726
- 7726S
Check the cause
Inspect physical electrical connections at External Hydraulic Valve 2 for connection problems
Verify the spool position sensor's output value
Check CAN/communication lines between the Dash and the Valve Module to rule out a harness or network issue
Repair steps
Clean and reseat connectors
Clean and reseat the valve connectors.
Test wiring harness
Test the wiring harness for continuity/shorts.
Replace sensor or module
Replace the spool position sensor or the valve module itself if the sensor is integrated and fails testing.
Parts you might need
(3)External Hydraulic Valve 2 Assembly
Generic part name
Spool Position Sensor
Generic part name
Hydraulic Valve Wiring Harness / Pigtail Connector
Generic part name
Get help to fix this fault by requesting a quote
